Clear recycling pellets

Purification challenges and their state-of-the-art solutions in plastics recycling

The challenges of current recycling processes

As environmental awareness from people, companies and governments has increased over the last few decades, noticeable efforts are being made in order to bring recycling processes of plastics or synthetic textiles to commercial scale.

A number of recycling technologies are under investigation, each with certain complexities and peculiar performances, but the ultimate goal of all of these is to economically manufacture cloths or other objects from recycled polymers rather than from virgin oil feedstock.

Purely mechanical processes, involving crushing/shredding of end-of-life objects before melting them into granules represent an older approach and are not capable o

f removing impurities chemically bound in the original structure of the recycled object; a typical example is constituted by pigments, dyes or other substances used to colour or to otherwise modify the properties of the original object. Plastics recycled this way have therefore restricted use, limited to products of inferior quality.

Plastic Pellets with impurities

Achieving plastics of a cleaner grade

In order to achieve plastics of a cleaner grade, comparable to what is produced by petrochemical processes and therefore with an identically wide range of application, recycling operations must include a purification step. These newer processes are more technology-intensive as they typically involve the depolymerisation of the plastic into the constituting monomers or its dissolution into specific solvents. When dissolution methods are applied, the molten plastic and the solvent are found as a single, homogeneous liquid phase and the molecular structure of the polymer (e.g. PP, PET) is kept. Impurities remain in suspension and can be removed by means of solid-liquid separation techniques.

A fundamental issue is represented by the fact that the above mentioned dissolution processes are typically carried out under harsh conditions: high temperatures, high pressure, chemically aggressive or otherwise hazardous solvents can be present, even in combination. As a result, the selection of the equipment to be used for the solid-liquid separation is significantly restricted to very few technologies only.

The ideal equipment is fully enclosed, thus preventing the process media from getting in contact with the external environment, working automatically, so not requiring intervention by operators, and is of course fabricated with materials capable to withstand the process conditions. Also, the separation efficiency shall be good enough to allow the removal of particles being typically in the size range of few units of a µm, down to fractions of a µm. This is for instance the case of titanium dioxide, one among the most common pigments used in the textile industry.

DrM, Dr. Mueller AG is a Swiss-based Company supplying sophisticated solid-liquid separation systems since 1982. DrM proprietary technology is installed in several thousands of plants worldwide and features candle type filter elements equipped with filter cloths and installed into a pressure vessel. The maximum operating pressure of the system is defined by the vessel design only, thus is virtually unlimited. Also, thanks to the absence of moving parts, the selection of materials of construction for both the vessel and the internal parts is not subject to any specific restriction imposed by temperature, pH or chemical compatibility whatsoever.

The inherent flexibility of the filter cloth and the peculiar design of the DrM candle element allow a thorough regeneration during the back-washing step and prevent the progressive blinding typically experienced with rigid elements, even when back-washed.

Filter cloths are normally fabrics themselves, and their thermal resistance sets the limit of applicability for the system as a whole. Since a few years DrM can offer filter cloths made with stainless steel filaments. This unique feature combines the flexibility of a fabric with an outstanding resistance up to 300°C continuous operating temperature.