Project Highlights

In offshore and onshore gas production, monoethylene glycol is injected into pipelines to suppress hydrate formation. When MEG returns from the field loaded with process water and divalent salts, it must be reclaimed before re-injection. The divalent salt removal step is critical: calcium and magnesium salts concentrated in the rich MEG stream will foul downstream […]

A pharmaceutical manufacturer in India required mixing equipment for anaerobic tetanus vaccine fermentation and downstream preparation stages. The process presented a specific engineering conflict: byproduct gases must be removed continuously from the broth, yet the bacterial cultures involved are sensitive to the shear and turbulence that conventional agitation relies on to achieve that transport. DrM […]

Separating a supported metal catalyst from an organic product after synthesis requires filtration that is both precise and consistent. The solid phase is a metal on ceria support, and the liquid phase is a fragrance ingredient or organic solvent. Any catalyst carry-over into the filtrate affects product purity directly, while incomplete cake dryness reduces the […]

Lithium brine processing requires precise solids control at multiple stages of the process circuit. Suspended minerals, silica, carbonates, and scaling precursors must be removed reliably to protect downstream equipment and maintain process stability. Inadequate filtration at any stage affects sorbent performance, downstream unit availability, and ultimately product quality. Project at a glance Customer Major lithium […]

Nitrocellulose filtration in wastewater treatment requires equipment that can handle fine, hydrophobic, and flammable solids safely and reliably. Conventional filter technologies frequently fall short on all three counts, making closed, automated pressure filtration the preferred approach for this application. Project at a glance Customer Chemical manufacturer, Thailand Application Nitrocellulose separation from high-concentration wastewater Scope One […]

Project at a glance Customer Steel producer, China Application Alkali purification in a hot-dip galvanizing line Scope Four FUNDABAC® candle filters Process challenge Removing fine iron powder, oil and sludge from hot (75°C) alkaline media so the alkali loop can be recirculated in a zero-discharge system, fully automated What filtration challenges arise in hot-dip galvanizing […]

Project at a glance Customer Adipic acid producer, China Application Solid-liquid separation in adipic acid production Scope Six FUNDABAC® candle filters (over 300 m² total filtration area) Process challenge High-solids adipic acid slurries in corrosive nitric acid environments, requiring stable filtration, clear filtrate and controlled slurry cake discharge How does candle filtration support reliable solid-liquid […]

Project at a glance Customer Rare earth processor, Australia Application Rare earth processing (hydrometallurgical solid-liquid separation) Scope One FUNDABAC® candle filter Process challenge Reliable separation of fine particles under variable feed conditions and stringent product-quality requirements, with clear filtrate and fully automated cake discharge in a closed design How does candle filtration support rare earth […]

Project at a glance Customer Chlor-alkali producer, Egypt Application Chlor-alkali brine polishing (upstream of the membrane cells) Scope Two FUNDABAC® candle filters Process challenge Removing fine suspended solids to protect membrane electrolysers, with dry cake discharge and corrosion-resistant materials for aggressive chlor-alkali brine How does candle filtration protect membranes in chlor-alkali brine polishing? DrM Group […]

Project at a glance Customer Chemical producer, Indonesia Application Oxy-hydrochlorination (OHC) wastewater treatment — catalyst solids removal Scope One FUNDABAC® candle filter Process challenge Removing fine copper-based catalyst solids from aggressive, corrosive, chlorinated OHC wastewater in a fully enclosed system to protect downstream treatment and water reuse How can solid-liquid separation improve wastewater handling in […]

Project at a glance Customer Pharmaceutical producer, Pakistan Application Insulin production (turnkey skid-mounted mixing plant) Scope Turnkey skid-mounted plant — FUNDAMIX® mixers, stainless steel pressure vessels, filtration units, integrated CIP/SIP Process challenge Low-shear, hygienic (cGMP) mixing of shear-sensitive proteins with integrated cleaning/sterilisation in a compact skid-mounted design How can low-shear mixing support reliable insulin production […]

Project at a glance Customer Direct air capture developer, USA Application Direct Air Capture (DAC) — solvent clarification Scope Six CONTIBAC® filters Process challenge Continuous removal of precipitated salts, degradation products and fine particulate from amine-based DAC solvent loops to protect solvent stability and system performance How does solid-liquid separation support solvent stability in direct […]